February 28, 20188 yr Bill is paid up to date, I have a basic Wal-Mart $7 Masterlock on it and the key won't work.
February 28, 20188 yr How big do they need to be? Good bolt cutters are usually 2 feet long and pretty heavy. They should cut it right open i am sure the storage unit has them.
February 28, 20188 yr Sometimes a pin will stick in the wrong position. It is most common when a padlock is left outside. Try spraying penetrating oil in it a couple of times and wiggle the key around a bunch. May solve your problem
February 28, 20188 yr I know this won't help you get your current one open, but maybe some food for thought going forward...I was always told NOT to put oil or WD-40 into a lock, as it'll only become "glue" for any dirt/dust that floats by, and be likely to gum up the mechanism inside. Was always recommended to use graphite powder instead.
February 28, 20188 yr Bill is paid up to date, I have a basic Wal-Mart $7 Masterlock on it and the key won't work. You're Big Slick and you can't pick a lock ? Come on, you're the Slickster.
March 1, 20188 yr Author Got a new lock, bolt cutters, and some kind of spray ( I'm assuming like WD40). Sprayed it first and after a little working the key it popped open. I replaced the rusty lock anyway.
March 2, 20188 yr Are you sure you’re not one row over? Got a new lock, bolt cutters, and some kind of spray ( I'm assuming like WD40). Sprayed it first and after a little working the key it popped open. I replaced the rusty lock anyway. So it wasn’t a row over?
Archived
This topic is now archived and is closed to further replies.